- “Rubber Tubing, Neoprene - 6.0×1.5mm” already exists in your wishlist
-
Retort Stand With Rod, Polypropylene
Catalogue No: 2071920/1
Moulded Retort Stands are non-corrosive, easy to handle and a good replacement of metal stands.
Metal rod is moulded in polypropylene to make it non-corrosive and acid / alkali proof.
Overall size approx 12.5x750mm (diameter x height) with one end threaded for mount on retort base.
This is a thick, stable and smooth base with a deep thread at its top to for rod.
* Side Hole
Size (mm) : 225×150Login to see prices -
Stirrers
Catalogue No: 2066550/1
Made of polypropylene, non-corrosive, non-staining and very useful for stirring
different solutions in the laboratory.
These stirrers have been designed to be tough and long-lasting in use.
* OD x Length (mm) : 10 x 250Login to see prices -
Float Rack
Catalogue No: 5051650
This Float Rack moulded in Polypropylene is quite compact, autoclavable and can hold 16 micro centrifuge tubes for incubation in water bath Easy to load, these are essential in microbiology & immunology labs.
The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.
* 16 MCTs of 1.5mlLogin to see prices -
Simple Cell Pot
Catalogue No: 5011150
Made in Polypropylene by which this pot is much durable. Chemical resistant. Used in Simple Cells and Voltmeters etc.
Material: Polypropylene.
* Simple Cell PotLogin to see prices -
Pcr Tube Rack
Catalogue No: 2072660
Useful for keeping PCR tubes. Top and base of the rack are made of tough and transparent polycarbonate, while the middle portion is of moulded polypropylene.
The rack has tube holding spaces uniformly placed so as to facilitate the use of multi-pipettes.
A number of racks can be stacked together to save shelf space.
The rack has Cap. to take up to 96 tubes of 0.2mL each.
* PCR Tube RackLogin to see prices -
Pipette Stand, Vertical, Light, PP
Catalogue No: 2072400
Moulded in polypropylene, the stand holds maximum of 94 pipettes and is rotatable on a central vertical axis for pipette selection.
The lower disc has four concentric troughs with tapered sides and open bottoms, which holds the pipette tips securely and allows the liquid drops to run off.
The upper disc has grid pattern that corresponds to the bottom disc and keeps pipettes vertical.
Stand can be easily assembled and disassembled.
* Pipette Stand, Vertical, LightLogin to see prices -
Tripod Stand, Round Top, Ci
Catalogue No: 2073200/1
Round annular top of cast iron top and mild steel legs. Finished in hammer tone / black colour.
Lower end of legs are bent outwards for stability and covered with plastic cap to avoid scratching the work surface.
*OD x Height (mm) : 125 x 200
Pack of (Pcs) : 10Login to see prices -
Clamps, Retort, With DetachableBoss Head
Catalogue No: 2070720/1
Die cast alloy metal jaws, vinyl dipped, mounted on detachable and adjustable bosshead.
The clamping jaws are rotatable about its mounting axis to any desired angle.
*Two Pronged, with spring loaded jaws
Pack of (Pcs) : 2Login to see prices -
Test Sieves, SS
Catalogue No: 2067291/2
Stainless Steel Spun frame of diameter about 200mm and height 60mm, has standard high grade sieves with uniform mesh size mounted in it.
Useful for determining the average particle size of amorphous solids.
*Mesh No. : 20
Pack of (Pcs) : 1Login to see prices -
Spatula, Flat, SS
Catalogue No: 2066390/7A
Flat on both end.
*Length (mm) : 200
Pack of (Pcs) : 25Login to see prices -
Spatula, With Spoon, SS
Catalogue No: 2066360/A4
One end flat and the other end in spoon form.
Spoon end is ideal for crushing lumps etc., while the flat rectangular end is useful for scraping chopping etc.
*Length (mm) : 200
Pack of (Pcs) : 25Login to see prices -
Boss Head, Square
Catalogue No: 2070240
Die-cast alloy metal body, chrome plated, accepts square and tubular sections up to 16.5mm diameter at right angles to each other. Will also hold flat articles such as rulers, magnets, drawing board metal / wooden strips etc. Size (mm) : 30 x 30 x 50
*Boss Head, Square
Pack of (Pcs) : 10Login to see prices -
Bottle, Aspirator with Cap and Tubulation, 250mL
Catalogue No: 2060120/1
* In accordance with IS 1388, (Part III), DIN/ISO 4796-3.
* Design of bottle comes with PP screw cap and pouring ring.
* Appropriate for the storage of aggressive meDia. n
* Made up of heat resistant Boro 3.3 glass.* Provided with durable matt-finished enameled area for marking in blue colour.
Capacity (mL) : 250
O.D. x Height (mm) : 70 x 140
Thread : GL-45
Packing : 1
Login to see prices -
Beaker, Low Form, With Spout, 5mL
Product Code: 2060420/1
* In accordance with IS 2619/ISO 3819 and DIN 12331.
* Manufactured from Heat Resistant, Low Expansion 3.3 Borosilicate Glass.
* Clear marked scale makes marking easier in blue colour.
* Uniform wall thickness helps in ideal heating of liquids.Capacity (mL) : 5
Approx. O.D. x Height (mm) : 22 x 30
Packing : 10Login to see prices -
Beaker, Low Form, With Spout, 400mL
Catalogue No: 2060420/8
* In accordance with IS 2619/ISO 3819 and DIN 12331.
* Manufactured from Heat Resistant, Low Expansion 3.3 Borosilicate Glass.
* Clear marked scale makes marking easier in blue colour.
* Uniform wall thickness helps in ideal heating of liquids.Capacity (mL) : 400
Approx. O.D. x Height (mm) : 80 x 110
Pack of (Pcs) : 6Login to see prices
