-
Clips, Mohr’s, Iron, Economical
Catalogue No: 2062370
Made of thick iron wire.
Nickle plated.
Finger grips of bent wire.
*Clips, Mohrs’s Iron, Economical
Pack of (Pcs) : 10Login to see prices -
Flame Spreader
Catalogue No: 2062250
Plated brass, wing shaped top of width 50mm, slips over burner tube of Bunsen burners to give a wide flat flame of uniform temperature.
Suitable for glass working, paint stripping etc.
*Flame Spreader
Pack of (Pcs) : 10Login to see prices -
Wire Gauze, SS, Superior
Catalogue No: 2068300
Made of SS wire with SS jacket. Size 150mm.
*Wire Gauge, SS, Superior
Pack of (Pcs) : 10Login to see prices -
Stand For Burner With Wire Gauze
Catalogue No: 2073300
Rectangular frame of plated metal wire has wire mesh gauze fixed at its top to prevent direct contact of the container surface with the flame, to facilitate gradual and uniform heating of container surface and to allow easy positioning of the container.
*Stand For Burner with Wire Gauze
Pack of (Pcs) : 10Login to see prices -
Tripod Stand, Superior
Catalogue No: 2073250
Round annular inner stepped top of cast iron. Ring painted and threaded legs are made of stainless steel.
Rubber caps are provided at the bottom of the legs for better stability.
*OD x Height (mm) : 100 x 150
Pack of (Pcs) : 10Login to see prices -
Tripod Stand, Triangular Top, Zinc Plated
Catalogue No: 2073160
Triangular top of thick sheet steel and mild steel legs.
Zinc plated.
Lower end of legs are bent outwards for stability and covered with plastic cap to avoid
scratching the work-surface.
*Length x Height (mm) : 125 x 200
Pack of (Pcs) : 10Login to see prices -
Tripod Stand, Triangular, Ms
Catalogue No: 2073120
Triangular shaped top, made of Mild Steel wire.
Lower end of legs covered with plastic cap to avoid scratching the work surface.
*Length x Height (mm) : 125 x 200
Pack of (Pcs) : 10Login to see prices -
Round Base For Rods
Catalogue No: 2071735
Made of cast iron. Suitable for round rods upto 12.5mm diameter rods.
*Round Base For Rods
Pack of (Pcs) : 1Login to see prices -
Saddle Base
Catalogue No: 2071730
A cylindrical base is designed to clamp light weight rods and plates.
It can hold a rod of maximum Dia. 14mm. Size (mm) 55 x 60.
*Saddle Base
Pack of (Pcs) : 1Login to see prices -
Channel Base, Rectangular
Catalogue No: 2071520
Rectangular base with raised channel shape at its top, matte finished.
One vertical wall of the channel has a plated clamping screw for tightly securing flat objects up to 13mm thickness.
Base dimensions 10.5 x 8.5cm approx.
Suitable for Safety Screen.
*Channel Base, Rectangular
Pack of (Pcs) : 1Login to see prices -
Retort Stand Base, A-Shaped, Heavy Pattern
Catalogue No: 2071320
Made of rugged cast iron for extra stability, comes with a baked, chemical resistant, paint finish.
The bridge between two support arms has threaded hole for 12.5mm diameter rod at the center.
Length of side 200mm approx.
With solid A shaped side arms.
*Retort Stand Base, A-Shaped, Heavy Pattern
Pack of (Pcs) : 1Login to see prices -
Retort Stand Base, Tripod, Large
Catalogue No: 2071720
A heavy, cast metal tripod base, with each leg having rectangular cross-section extending about 130mm from its center and a height of about 40mm.
A triangular shaped hole with a threaded tightening knob provides firm grip on the mounted rods.
Its shape, size and weight renders high degree of stability to the mounted objects.
With non-skid rubber feet and scratch resistant epoxy coating.
*Retort Stand Base, Tripod, Large
Pack of (Pcs) : 1Login to see prices -
Retort Stand Base, Tripod, Heavy
Catalogue No: 2071640
A heavier, more stable, cast iron tripod base, finished matte black, having central raised portion with a circular hole to accept rods up to 12.5mm diameter.
Provided with a plated metal, threaded thumb screw for securely clamping the rods.
*Retort Stand Base, Tripod, Heavy
Pack of (Pcs) : 1Login to see prices -
Test Tube Holder, Metal Wire
Catalogue No: 2071080
Plated steel wire holder with finger grip and wire collar.
The jaws accept tubes up to 40mm diameter and their alignment is maintained by a wire collar.
Overall length about 16cm.
*Test Tube Holder, Metal Wire
Pack of (Pcs) : 10Login to see prices -
Clamp, Retort, Two Pronged
Catalogue No: 2070484
Two pronged vinyl dip jaws. Accepts round or rectangular shaped articles from 15-
60mm diameter. Fitted with 15cm long rod.
*Clamp, Retort Two pronged
Pack of (Pcs) : 2Login to see prices
