-
Funnels, Separating, Polypropylene
Catalogue No: 2065100/2
Polypropylene separating funnel features excellent contact clarity and strength with inertness to acids / alkalis and autoclavable also.
Comes with a leak-proof threaded screw-cap.
The push-fitted polypropylene stop-cock is fitted in stem with PTFE key.
* Cap. (mL) : 250Login to see prices -
Funnels, Analytical, Polypropylene
Catalogue No: 2064620/1
Designed for analytical chemistry.
Provided with both internal and external ribs to avoid air lock.
* OD (mm) : 50
Stem Length (mm) : 50Login to see prices -
Flasks, Volumetric, Polypropylene
Catalogue No: 2064470/1
Translucent, Polypropylene flasks are strong, unbreakable and offer good contact clarity. The flasks are individually calibrated and have leak proof threaded caps. Can be autoclaved and have good chemical resistance.
* Cap. (mL) : 25Login to see prices -
Flasks, Conical, Polypropylene
Catalogue No: 2064230/1B
Conical shaped polypropylene flasks are rigid, translucent and autoclavable.
The screw cap features the flask content free from contaminations and make flask
leak-proof.
Before autoclaving, threads should be disengaged.
* Cap. (mL) : 100Login to see prices -
Desiccators, Vaccum
Catalogue No: 2063450/2
Strong, easy to handle lightweight desiccator with lower container made of polypropylene
and upper transparent dome of rigid polycarbonate giving a crystal clear view of the
desiccant placed inside. This auoclavable desiccator can hold vacuum up to 740mm of Hg for 24 hours without any greasing. Dome provided with a knurled knob at the top for easy handling and polypropylene stopcock with self lubricating PTFE plug. This stopcock works three ways, for vacuum creation, shutting off and vacuum release. Lower container has internal groove on the flange to take a silicon rubber Oring. Supplied with thick perforated polypropylene plate with a big hole at the center for easy lifting and small holes providing air troughs and support to the dishes. Also allows use of incandescent crucibles with porcelain desiccator plates. A convenient neatly fitted removable pan holds calcium chloride or other drying agents without any risk of corrosion.
* Size (mm) : 200
Flange OD (mm) : 232
ID (mm) : 199Login to see prices -
Desiccators, Plain
Catalogue No: 2063420/2
Without stopcock.
* Size (mm) : 200
Flange OD (mm) : 232
ID (mm) : 199Login to see prices -
Burette
Catalogue No: 2061980/3
Transparent acrylic body with a leakproof stop-cock having self lubricating PTFE plug.
Each burette individually calibrated for maximum accuracy. Material PMMA / TPX.
* Capacity (mL) : 100Login to see prices -
Bottles, Wash, Superior
Catalogue No: 2061320/3
Resilient, translucent and unbreakable wide mouth bottle of low density Polyethylene, single piece blowing.
These bottles have built in delivery tube blown outside the bottle, ensuring no contamination of impurities from the bench while filling.
Entire contents can be dispensed without tipping or shaking, stream of liquid jet controlled by the amount of pressure.
Graduated on the outside to give an approximation of volume of liquid to be filled or dispensed.
Comes with leak proof screw-cap with inner plug.
Acid and alkali proof.
* Capacity (mL) : 500Login to see prices -
Bottles, Wash, Economical
Catalogue No: 2061260/4
Resilient, narrow mouth bottle of low density Polyethylene, acid and alkali proof.
These Bottles are easy to squeeze and have screw cap with bent delivery tube.
Liquid is expelled out through the flexible delivery tube by squeezing the bottle and
can be directed wherever required.
* Capacity (mL) : 1000Login to see prices -
Bottles, Dropping, Euro Design
Catalogue No: 2060842/1
Narrow Mouth Polyethylene Bottles with screw cap and lid. Used for dispensing small uniform drops of liquid from container.
* Capacity (mL) : 15Login to see prices -
Bottles, Dropping, Tk Pattern
Catalogue No: 2060840/1
Narrow Mouth Polyethylene Bottles. Used for dispensing small uniform drops of liquid from container when squeezed gently.
* Capacity (mL) : 60Login to see prices -
Bottles, Aspirator, Polypropylene
Catalogue No: 2060210/1
Light weight and easy to handle.
These bottles are moulded in Polypropylene, which is autoclavable, dependable and have good impact strength providing extra durability to the bottle.
The leakproof spigot is screwed to the bottle body and requires only a half turn to open or close providing quick and convenient dispensing.
It is acid and alkali resistant and can be used for storing and dispensing solutions, media and distilled water.
Can be autoclaved, when empty, to prevent recurring bacterial growth.
* Capacity (mL) : 5000Login to see prices -
Measuring Jugs, Polypropylene
Catalogue No: 2065590/3
Long form jugs, moulded in polypropylene, clear, autoclavable and chemical resistant.
Provided with handle for easy and convenient handling and have raised graduation for easy reading.
* Capacity (mL) : 1000
Least Count 10Login to see prices -
Coplin Jar (Euro Design)
Catalogue No: 2065240/1
These coplin jar made of polypropylene can hold 10 microscope slide of the size 75mm x 25mm.
Slides are held upright due to the grooved interior.
The built in seal ring in the cap makes this coplin jar a completely leak proof one.
* Coplin Jar (Euro Design)Login to see prices -
Bottles, Dropping, TK Pattern
Catalogue No: 2060840/2
Narrow Mouth Polyethylene Bottles. Used for dispensing small uniform drops of liquid from container when squeezed gently.
* Capacity (mL) : 125Login to see prices
