-
Test Tube Stand with Six holes and Six pegs
Catalogue No: 2072760/1
* Made of seasoned hardwood, well polished, with single row of holes for locating test tubes.
* Vertical pegs also provided for quick drying of the test tubes.For twelve test tubes, with twelve pegs, two holes of 32mm dia. and ten holes of 22mm dia.
Pack of (Pcs) : 1
Login to see prices -
Test Tube Stand, Wood & Plastic for 6 test tubes
Catalogue No: 2072680/1
* Comprises wooden base and top with single row of holes, without pegs.
* Clips together quickly and easily with two moulded ABS plastic supports – one on either side.
* Supplied flat for compact storage when not in use.12 Test Tubes of 21mm dia.
Pack of (Pcs) : 1
Login to see prices -
Burette Stand – Double, Base size: 290x110mm
Catalogue No: 2072040/1
* Made of seasoned hardwood, well-polished with moulded plastic clamping screws,
cork lined jaws.
* Rod size approx. 16 x 460mm (OD x Height).Double, Base size: 290x110mm
Pack of (Pcs) : 1
Login to see prices -
DROPPING BOTTLES STAND, WOODEN
Cat. No. 2072120/2
* Well polished hardwood stand with holes of about 45mm dia for dropping bottles up to 60mL capacity.
For 12 Bottles
Pack of (Pcs): 10
Login to see prices -
DROPPING BOTTLES STAND, WOODEN
Cat. No. 2072120/1
* Well polished hardwood stand with holes of about 45mm dia for dropping bottles up to 60mL capacity.
For 6 Bottles
Pack of (Pcs): 10
Login to see prices -
Stopper Plastic Hexagonal, 45/40
Catalogue No: 2063065_8
• Unique design for easy gripping. Chemical resistant.
Capacity (mL) : 45/40Pack of (Pcs) : 100
Login to see prices -
Bottles, Wash, Superior, 1000ml
Catalogue No: 2061320_4
* Resilient, translucent and unbreakable wide mouth bottle of low density Polyethylene, single piece blowing.
* These bottles have built in delivery tube blown outside the bottle, ensuring no contamination of impurities from the bench while filling.
* Entire contents can be dispensed without tipping or shaking, stream of liquid jet controlled by the amount of pressure.
* Graduated on the outside to give an approximation of volume of liquid to be filled or dispensed.
* Comes with leak proof screw-cap with inner plug.
* Acid and alkali proof.Capacity (mL) : 1000
Pack of (Pcs) : 6
Login to see prices -
LABORATORY METALWARE KIT-4
Cat. No. 2073987/1
This set comprises of the following:
* Retort Stand Base with Rod, Base Size 250 x 160mm, Rod Size 12.5 x 750
(2071600/3)
* Burette Clamp, Metal, Fisher Type, Double (2070800/2)
* Retort Ring, With Boss Head, Inner Dia. 100mm (2073360/3)
* Boss Head, Die Cast, Double ‘V’ Painted (2070160/1)
* Tripod Stand, Triangular, MS, Length 125, Height 200 (2073120)
* Wire Gauze, GI with Ceramic Center, Size 150mm (2068280/2)
* Burners, Bunsen with Heavier Sturdy Sheet Metal Base. (2062040/1)
* Spatula, With Spoon, Stainless Steel, length 125mm (2066360/1)
* Tongs, Crucible, Straight With Bow, SS, Length 150mm (2073680/1)
* Tongs, Beaker Jaws Covered with Rubber Sleeves 2073840/4
* Test Tube Holder, Metal Wire (2071080)
* Clamps, Retort, Three Pronged, with Clamping Screw of Plated Brass (2070440/1)
* Clamps, Retort, Four Pronged, Zinc Plated Clamping Jaws (2070400/2)Laboratory Metalware Kit-4
Pack of (Pcs): 1
Login to see prices -
TONGS, FLASKS, SAFETY
Cat. no. 2073960/B
* Stainless steel, with cork lined rectangular angled jaws providing extremely firm grip to flasks of any shape from 100-2000mL capacity.
* Overall length of tong 30cm approx.Tongs, Flasks, Safety
Pack of (Pcs): 10
Login to see prices -
Tongs, Crucible, With Bow, Ss
Catalogue No: 2073680/5
* Metal wire, Rolled flat at joint, jaws corrugated inside.
Painted, Length: 600mm
Pack of (Pcs) : 10
Login to see prices -
Tongs, Crucible, With Bow, Ss
Catalogue No: 2073680/4
* Metal wire, Rolled flat at joint, jaws corrugated inside.
Painted, Length: 500mm
Pack of (Pcs) : 10
Login to see prices -
DEFLAGRATING SPOON WITH DISC and CAP
Cat. No. 2063240/2
* Brass cup mounted at the end of steel wire, shaped to prevent contact with the container, with an adjustable aluminum disc held into position by a holed rubber
stopper to keep it at the desired height from the brass cup.
* diameter of disc 90mm and cup diameter 18mm.Deflagrating Spoon With Disc and Cap-400MM
Pack of (Pcs): 10
Login to see prices -
WIRE GAUZE, GI WIRE, PLAIN
Cat. No. 2068284/3
* Close mesh with folded edges.
Size (mm) : 200
Pack of (Pcs): 10
Login to see prices -
WIRE GAUZE, GI WIRE, PLAIN
Cat. No. 2068284/2
* Close mesh with folded edges.
Size (mm) : 150
Pack of (Pcs): 10
Login to see prices -
WIRE GAUZE, GI WIRE, PLAIN
Cat. No. 2068284/1
* Close mesh with folded edges.
Size (mm) : 125
Pack of (Pcs): 10
Login to see prices