-
Tripod Stand, Round Top, Concentric Rings
Catalogue No: 2073240/3
* Tripod stand with round annular top of sheet metal, light pattern. Ring enamel painted and legs zinc plated.
* The round annular top comes with an additional concentric ring to fit inside it.OD x Height (mm) : 120 x 225
Pack of (Pcs) : 10
Login to see prices -
Tripod Stand, Round Top, Concentric Rings
Catalogue No: 2073240/2
* Tripod stand with round annular top of sheet metal, light pattern. Ring enamel painted and legs zinc plated.
* The round annular top comes with an additional concentric ring to fit inside it.OD x Height (mm) : 90 x 225
Pack of (Pcs) : 10
Login to see prices -
Tripod Stand, Round Top, Concentric Rings
Catalogue No: 2073240/1
* Tripod stand with round annular top of sheet metal, light pattern. Ring enamel painted and legs zinc plated.
* The round annular top comes with an additional concentric ring to fit inside it.OD x Height (mm) : 90 x 150
Pack of (Pcs) : 10
Login to see prices -
Tripod Stand, Round Top, CI
Catalogue No: 2073200/2
* Round annular top of cast iron top and mild steel legs. Finished in hammer tone / black colour.
* Lower end of legs are bent outwards for stability and covered with plastic cap to avoid scratching the work surface.OD x Height (mm) : 150 x 200
Pack of (Pcs) : 10
Login to see prices -
Tripod Stand, Triangular, SS
Catalogue No: 2073080/1
* Triangular shaped top, made of Stainless Steel wire.
* Lower end of legs covered with plastic cap to avoid scratching the work surface.Length x Height (mm) : 125 x 200
Pack of (Pcs) : 10
Login to see prices -
Draining Rack, Metal Wire
Catalogue No: 2071960/1
* For general laboratory use. Made of thick metal wire that provides durability and ruggedness, completely covered with plastic layer to avoid any rusting of metal wire, ensuring longer life.
* Also provided with an arrangement for hanging on the wall.Draining Rack, Metal Wire, 32 Peg
Pack of (Pcs) : 1
Login to see prices -
Rods For Retort Stands, SS
Catalogue No: 2071880/1
* Metal rods with one end threaded with shoulder ensures straight vertical, upright fit on any of the bases given above.
* The rods have reduced diameter at threaded portion that enables rod to sit flat support bases.
* All rods have rounded top and provided with a through hole just above the shoulder to permit insertion of tommy bar for tightening of rods to bases.
Material : SS
Size (mm) : 10 x 500Pack of (Pcs) : 10
Login to see prices -
Rods For Retort Stands, MS
Catalogue No: 2071840/1
* Metal rods with one end threaded with shoulder ensures straight vertical, upright fit on any of the bases given above.
* The rods have reduced diameter at threaded portion that enables rod to sit flat support bases.
* All rods have rounded top and provided with a through hole just above the shoulder to permit insertion of tommy bar for tightening of rods to bases.Material : MS
Size (mm) : 10 x 500Pack of (Pcs) : 10
Login to see prices -
Rods For Retort Stands, Aluminum
Catalogue No: 2071800/1
* Metal rods with one end threaded with shoulder ensures straight vertical, upright fit on any of the bases given above.
* The rods have reduced diameter at threaded portion that enables rod to sit flat support bases.
* All rods have rounded top and provided with a through hole just above the shoulder to permit insertion of tommy bar for tightening of rods to bases.Material : Aluminum
Size (mm) : 10 x 500Pack of (Pcs) : 10
Login to see prices -
Retort Stand Base, Tripod, Economical
Catalogue No: 2071680/1
* Cast metal tripod base, well painted with stoving enamel, with a threaded hole at its center to take a rod of 12.5mm diameter.
Base Size (mm) : 110
Pack of (Pcs) : 1
Login to see prices -
Retort Stand Base, A-Shaped, Big
Catalogue No: 2071280/1
* Made of rugged cast iron for extra stability, comes with a baked, chemical resistant, paint finish.
* The bridge between two support arms has threaded hole for 12.5mm diameter rod at the center.
* Length of side 200mm approx.
without leveling screwsPack of (Pcs) : 1
Login to see prices -
Test Tube Holder, Metal Strip
Catalogue No: 2071040/1
* Two metal strips (made of MS, chrome plated) mounted in a wooden handle, with
sliding collar and free end curved to accept tubes of diameter 22-32mm.Particulars-Metal Strip(MS)
Pack of (Pcs) : 10
Login to see prices -
Burette Clamp, Metal, Fisher Type
Catalogue No: 2070800_2
* For holding burettes, complete body of die-cast metal making it light-weight, durable and sturdy.
* Provided with a spring loaded positive grip and release.
* The special design provides vice-like grip to the burette for a positive clamping.
* Bosshead clamp secures it firmly at desired position on the rod of about 13mm diameter.Particulars-Double, for 2 burette
Pack of (Pcs) : 1
Login to see prices -
Burette Clamp
Catalogue No: 2070760/2
For holding burettes vertically in a retort stand, die cast with built-in boss head and spring loaded jaws covered with rubber sleeve.
*Double for 2 burette
Pack of (Pcs) : 5Login to see prices -
Burette Clamp
Catalogue No: 2070760/1
For holding burettes vertically in a retort stand, die cast with built-in boss head and spring loaded jaws covered with rubber sleeve.
*Single for 1 burette
Pack of (Pcs) : 5Login to see prices