-
Boss Head, Square
Catalogue No: 2070240
• Die-cast alloy metal body, chrome plated, accepts square and tubular sections up to 16.5mm diameter at right angles to each other. Will also hold flat articles such as
rulers, magnets, drawing board metal / wooden strips etc. Size (mm) : 30 × 30 × 50, Boss Head, SquarePack of (Pcs) : 10
Login to see prices -
Thermometer Holder
Catalogue No: 2071200
• A pair of spring steel strips, curved at one end to accommodate thermometers, are mounted in a metal stem, which in turn is attached to a die-cast boss-head.
• Provided with winged nut to tighten the grip of curved jaws. The holder portion is detachable from the boss-head Particulars-Thermometer HolderPack of (Pcs) : 10
Login to see prices -
Clamp, Retort, Two Pronged
Catalogue No: 2070482
Two pronged cork lined jaws, comprises jaws of die-casting with other parts. Jaws clamp accepts articles from 15-60mm diameter actuated by brass nickel-plated
pummels and twin screw.
Fitted with 15cm long rod.
Provided with wing shaped tightening arrangement.
*Clamp, Retort, Two Pronged
Pack of (Pcs) : 2Login to see prices -
Burners, Bunsen
Catalogue No: 2062040/1
* Plated burner tube of brass of approximate size 100x12mm (height x diameter), with
rotatable air-regulator and a cylindrical riffled connector, mounted on a painted
metal base of diameter about 70mm. Overall height 145mm.
* Suitable for NG and LPG.With heavier, sturdy sheet metal base.
Pack of (Pcs) : 1
Login to see prices -
Thermometer Holder With Boss Head
Catalogue No: 2070280/1
• Multipurpose aluminum section boss head with brass headed nickel plated steel thumb screw and plated wing shaped nut for fixing the different attachments like
thermometer holders, suspension hangers etc.
• A unique design with phosphorus bronze clamps for holding objects vertically or horizontally, gives it more flexibility.With Detachable Attachments
Pack of (Pcs) : 10
Login to see prices -
Thermometer Holder With Boss Head
Catalogue No: 2070280/2
• Multipurpose aluminum section boss head with brass headed nickel plated steel thumb screw and plated wing shaped nut for fixing the different attachments like
thermometer holders, suspension hangers etc.
• A unique design with phosphorus bronze clamps for holding objects vertically or horizontally, gives it more flexibility.
Particulars-With Thermometer HangerPack of (Pcs) : 10
Login to see prices -
Clamps, Retort, Four Pronged
Catalogue No: 2070400_1
* Clamping jaws of Die-cast alloy metal, having four cork lined prongs to take articles from 2-90mm diameter.
* The design of the jaw ensures a firm grip at all angles of opening. Plated steel thumb screw for tightening the clamp jaws.
* Fitted with 15cm long plated MS rod for mounting on suitable boss-head.Particulars-Painted clamping jaws
Pack of (Pcs) : 2
Login to see prices -
Burette Clamp Single With Bosshead
Catalogue No: 2070445/1
Burette clamps having aluminum alloy metal jaws with boss-head.
*With PVC coated jaws
Pack of (Pcs) : 1Login to see prices -
Test Tube Stand, 3 Tier, Aluminum
Catalogue No: 2072920/3B
Made of sheet metal, from thick 18SWG sheet, 3-tiered construction.
*Hole Dia (mm) : 18
No. of Holes : 18
Pack of (Pcs) : 1Login to see prices -
Tongs, Beaker
Catalogue No: 2073840/4
* For the convenient and safe handling of beaker containing hot solutions and for pouring out the contents.
* The curved jaws are covered to provide thermal insulation to the metal body and to ensure firm grip.
* Overall length of tong 30cm approx.
* Made of stainless steel.Jaws covered with rubber sleeves
Pack of (Pcs) : 5
Login to see prices -
Rods For Retort Stands, SS
Catalogue No: 2071880/6
* Metal rods with one end threaded with shoulder ensures straight vertical, upright fit on any of the bases given above.
* The rods have reduced diameter at threaded portion that enables rod to sit flat support bases.
* All rods have rounded top and provided with a through hole just above the shoulder to permit insertion of tommy bar for tightening of rods to bases.Material : SS
Size (mm) : 12.5 x 500Pack of (Pcs) : 10
Login to see prices -
Test Tube Stand, 3 Tier, Aluminum
Catalogue No: 2072920/4A
* Made of sheet metal, from thick 18SWG sheet, 3-tiered construction.
Hole Dia (mm) : 25
No. of Holes : 12Pack of (Pcs) : 1
Login to see prices -
Tripod Stand, Triangular, Ms
Catalogue No: 2073120
* Triangular shaped top, made of Mild Steel wire.
* Lower end of legs covered with plastic cap to avoid scratching the work surface.Length x Height (mm) : 125 x 200
Pack of (Pcs) : 10
Login to see prices -
Tongs, Beaker
Catalogue No: 2073885
* Made of steel with a riveted joint. Easy to handle beakers and flasks.
* Thermally asbestos rayons jaws are curved to provide firm grip.
* Can hold beakers from 50mL to 500mL.Tongs, Beaker
Pack of (Pcs) : 2
Login to see prices -
Tripod Stand, Round Top, CI
Catalogue No: 2073200/2
* Round annular top of cast iron top and mild steel legs. Finished in hammer tone / black colour.
* Lower end of legs are bent outwards for stability and covered with plastic cap to avoid scratching the work surface.OD x Height (mm) : 150 x 200
Pack of (Pcs) : 10
Login to see prices